как узнать версию прошивки fujifilm xt3
Всё об установке обновлений на фотоаппараты Fujifilm
Зачем и как обновлять камеры Fujifilm. Пошаговая инструкция.
Зачем обновлять фотоаппарат?
Сейчас программное обеспечение фотоаппаратов становится настолько сложным, а новинки выходят так часто, что отловить и исправить все ошибки к релизу часто не представляется возможным, как и добиться максимальной отдачи от всех компонентов камеры. В списке изменений к новой версии почти всегда указан общий пункт «исправления ошибок», но намного интереснее, когда видишь «повышение точности ручной настройки фокуса» в обновлении камеры, или «улучшение функции оптической стабилизации» в обновлении объектива. Да, и в объективе есть прошивка и её тоже надо обновлять.
Как узнать версию прошивки фотоаппарата или объектива
Чтобы узнать текущую версию прошивки фотоаппарата или объектива Fujiilm
2) Удерживая кнопку [DISP/BACK], включите камеру.
3) Отобразится текущая версия прошивки камеры и объектива, если он установлен.
4) Чтобы выйти из решима информации о прошивке нажмите кнопку [MENU/OK] и после этого выключите камеру. Прошивка объектива выясняется тем же способом, когда объектив подключен к камере.
Как узнать последнюю доступную версию прошивки для вашей камеры или объектива fuji?
Конечно же на официаьном сайте Fujifilm в разделе Support/Digital Cameras/Download Software & Firmware
1) Внутри раздела выберите тип камеры:
2) Внутри раздела найдите вашу камеру и объектив и сравните версию прошивки на сайте с установленной на вашей камере.
Как узнать версию прошивки fujifilm xt3
FUJIFILM Россия запись закреплена
Пошаговая инструкция обновления ПО для камер Fujifilm X
Понадобится:
— Камера/Объектив. Если необходимо обновить ПО объектива, он должен быть установлен на камеру. Если необходимо обновить ПО только камеры, рекомендуется проводить процедуру без объектива;
— Отформатированная SD карта памяти;
— Файл прошивки;
— Полностью заряженный аккумулятор;
2) Устанавливаем в камеру полностью заряженный аккумулятор и карту памяти с файлом прошивки.
3) Зажимаем кнопку «DISP BACK» и включаем камеру.
4) Появится информация об актуальной версии ПО камеры и объектива. Нажимаем кнопку «MENU OK».
5) Выбираем пункт «КАМЕРА» или «ОБЪЕКТИВ», в зависимости от того какое ПО необходимо обновить. Нажимаем кнопку «MENU OK».
6) Если загружен корректный файл ПО и он скопирован на карту памяти правильно, камера предложит к установке новую версию. Нажимаем кнопку «MENU OK»
7) Появится предупреждение «Не открывайте батарейный отсек. Не выключайте камеру. Когда присоединен объектив, никогда его не снимайте.» Нажимаем кнопку «MENU OK»
8) Процесс установки займет некоторое время, в среднем около двух минут.
9) Камера оповестит Вас об успешном обновлении ПО. Для завершения необходимо выключить аппарат.
Для обновления не обязательно соблюдать поочерёдность версий. Можно обновиться с самой первой версии до самой последней.
X-T3 Firmware update
Last Updated: 29.06.2021
Overview
Notes
Please read this update after refreshing this page.
The firmware upgrade is not required if its version is latest.
Please use your camera and lens with the latest version of firmware.
Firmware update via the smartphone or a tablet.
Settings you have changed can be saved by FUJIFILM X Acquire and so on.
Detail of the firmware update
The firmware update Ver.4.11 from Ver.4.10 incorporates the following issues:
When using the Shoe mount flash EF-X8, the display of the FLASH SETTING is changed from “SUPPLIED FLASH” to “EF-X8”.
The phenomenon is fixed that an image cannot be played back with a specified file name created by the EDIT FILE NAME function.
Fix of minor bugs.
The firmware update Ver.4.10 from Ver.4.00/4.01 incorporates the following issues:
Display of IP ADDRESS in Setup Menus > CONNECTION SETTING > INFORMATION is added.
Improvement of shutter speed setting for TTL slow sync flash shooting
In P and A mode, this firmware makes the slowest shutter speed slower than 1/8 sec. for the shooting used in a scene where relatively long exposure is required (ex. a flash shooting with night view background). In case the shutter speed setting is AUTO, the shutter speed becomes max. 4 sec in P mode and max. 30 sec. in A mode.
Fix of minor bugs.
The firmware update Ver.4.00 from Ver.3.30 incorporates the following issues:
Regarding the detail of the improvements, download the “X-T3 New Features Guide” from our website.
The update will improve the autofocusing performance of the X-T3 to the same level as the “FUJIFILM X-T4”(X-T4).
* When compared with the Firmware Ver.3.30.
** When using the FUJINON Lens XF50mmF1.0 R WR.
Other improvements.
1) The size of the Single AF point can be adjusted during video recording.
2) Photo ratings can be read by third-party software, allowing users to find their favorite pictures quickly.
3) The focus point can be changed by the focus lever during AE lock.
4) The default setting of the AF-S PRIORITY SELECTION in the RELEASE/FOCUS PRIORITY of the SHOOTING menu is changed to FOCUS from RELEASE.
Fix of minor bugs.
The firmware update Ver.3.30 from Ver.3.21 incorporates the following issues:
Camera performance used with the XF50mmF1.0 R WR is optimized.
The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
Fix of minor bugs.
The firmware update Ver.3.21 from Ver.3.20 incorporates the following:
Fix of minor bugs.
The firmware update Ver.3.20 from Ver.3.10 incorporates the following:
Enhanced autofocus.
*Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
*Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
*Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
Capability to save up to 9,999 pictures in each folder.
Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. This update will raise the limit by ten times to 9,999 pictures.
The phenomena below during a movie shooting are fixed.
*Focus hunting at the minimum aperture.
*A black line can sometimes appear on the bottom of the center.
Fix of minor bugs.
The firmware update Ver.3.10 from Ver.3.01 incorporates the following issues:
Regarding the details of No.1, download the “X-T3 New Features Guide” from our website.
Gimbal / Drone support (*)
This firmware adds the following function to complement the current support for still image shooting via USB communications:
・Starting and ending video recording
・Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recording
・Making manual focus adjustments for video recording
*This is the function via USB communication. About supported gimbals and drones, refer to support information not only on our website but also manufacturers’ websites.
Fix of minor bugs.
The firmware update Ver.3.01 from Ver.3.00 incorporates the following issue:
The phenomenon is fixed that in rare cases, the message of “TURN OFF THE CAMERA AND TURN ON AGAIN” can appear in the drive mode of “S” when you repeatedly and rapidly take photos in a short time.
The firmware update Ver.3.00 from Ver.2.10 incorporates the following issues:
Regarding the details of No.2,4 and 8 download the “X-T3 New Features Guide” from our website.
Strengthened the accuracy of face / eye detection AF performance
The AF algorithm has been improved along with the accuracy of face / eye detection AF. The ability to detect faces in the distance has been enhanced by approximately 30% and AF tracking is now more stable, even when an obstacle appears in the way. The improvements in AF are applicable to both still photos and video recording.
New Face Select function
The Face Select function has been introduced to provide priority auto-focus, tracking and exposure on a selected subject when multiple faces have been detected. The priority face can be selected by using the touch screen or focus lever.
Faster AF speed for subjects at a distance
A Double Tap Setting and Touch Function has been added to the touch screen settings*. The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
Intuitive operation of touch screen
A Double Tap Setting and Touch Function has been added to the touch screen settings(*1). The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
*1：By default, Touch Screen Setting, Double Tap Setting and Touch Function are set to all OFF. Touch Screen Setting must be set to ON to use the touch screen function.
Focus frame when EYE DETECTION SETTING
When using EYE DETECTION SETTING, only focus frame on eye is displayed.
Improvement of AF/AE area tracking when using EVF
When using the EVF, tracking function for AF/AE area movement by touch screen is improved.
Push function of the Focus stick when INTERVAL TIMER SHOOTING
The push function is disabled when INTERVAL TIMER SHOOTING.
FLICKER REDUCTION function
The options are changed from ON/OFF to ALL FRAMES/FIRST FRAME/OFF. And when choosing FIRST FRAME, the speed of CH continuous shooting is improved.
Message when IMAGE TRANSFER ORDER
If there is no image of TRANSFER ORDER when turning on a camera, no message appears.
Fix of slight defects.
The firmware update Ver.2.10 from Ver.2.00 incorporates the following issues:
Regarding the details of No.1 download the “X-T3 New Features Guide” from our website.
Recording over 4GB movie file as one file
Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) (*1).
*1：By using SD memory cards less than or equal to 32GB, movie recording will continue without interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.
Note：Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.
Fix of slight defects.
The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues:
Regarding the details of No.1,3 and 6 download the “X-T3 New Features Guide” from our website.
4K HDR video recording in Hybrid Log Gamma (HLG)
Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
*1：Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
Simultaneous output of Film Simulation and F-Log footage (*2)
Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
*2：Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose different image size (4K/FHD) for HDMI output and internal SD card recording.
Display color temperature (Kelvin) on EVF/LCD
Color temperature (Kelvin) can be displayed on EVF/LCD.
Supports slower shutter speeds with DCI4K/4K
29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4：Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.
Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264
Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
Display power supply icon
Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
*5：Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
*6：Product may not be available on your country.
Fix of slight defects.
The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:
The phenomenon is fixed that in rare cases, the buttons cannot be used while using histogram display or sports finder.
The phenomenon is fixed that in rare cases, RAW image cannot be recorded normally under a certain conditions (Sports finder mode, continuous shooting with electronic shutter and so on)
Fix of slight defects.
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:
Compensation of distortion is optimized in CH shooting with electronic shutter.
The phenomenon is fixed that the mechanical LOCK of some SD cards is not recognized.
Fix of other slight defects
Firmware Update Steps
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
Download
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
X-T30 Firmware update
Last Updated: 17.02.2021
Overview
Notes
Please read this update after refreshing this page.
The firmware upgrade is not required if its version is latest.
Please use your camera and lens with the latest version of firmware.
Detail of the firmware update
The firmware update Ver.1.40 from Ver.1.30 incorporates the following issues:
Regarding the details of the improvements, download the “X-T30 New Features Guide” from our website.
Support for FUJIFILM X Webcam.
This update adds compatibility with the FUJIFILM X Webcam (X Webcam) software, which allows the camera to be used as a high-quality webcam by installing X Webcam on a computer and connecting the camera to a computer via a USB cable.
Apply Film Simulations through X Webcam.
Apply Fujifilm’s one-of-a-kind Film Simulation modes to provide a personal touch to any web meeting or interaction.*1
*1 This upgrade does not provide the capability to make adjustments to camera settings from a tethered computer.
Rating Information is Now Saved.
Rating information assigned in-camera, is now visible in third-party software to allow for enhanced catalog management.
Fix of minor bugs.
The firmware update Ver.1.30 from Ver.1.20 incorporates the following issues:
Camera performance used with the XF50mmF1.0 R WR is optimized.
The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
Fix of minor bugs.
The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:
Regarding the details of No.1, download the “X-T30 New Features Guide” from our website.
Gimbal / Drone support (*)
This firmware adds the following function to complement the current support for still image shooting via USB communications:
・Starting and ending video recording
・Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recording
・Making manual focus adjustments for video recording
*This is the function via USB communication. About supported gimbals and drones, refer to support information not only on our website but also manufacturers’ websites.
Enhanced autofocus.
*Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
*Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
*Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
Fix of minor bugs.
There is a wrong description in the firmware update information of Ver.1.20.
X-T30 doesn’t have the function of “Capability to save up to 9,999 pictures in each folder”.
We apologize for the wrong description and your inconvenience which may cause.
The firmware update Ver.1.10 from Ver.1.01 incorporates the following issues:
Improvement of Q (quick menu) button operability
To avoid accidentally pressing the Q (quick) menu, the button has changed to one of Fn(function) buttons. This will allow customers to disable the Q button function and also to allocate the Q (quick) menu to a different Fn button.
Fix of minor bugs
Regarding the method and explanation of the operation, refer to the Q(quick menu) button in the Owner’s Manual.
The firmware update Ver.1.01 from Ver.1.00 incorporates the following issue:
Improved operability of the Q (quick menu) button
To avoid accidentally opening the Q (quick) menu, the button reaction time has been increased.
*FUJIFILM Corporation plans an additional firmware update in June. This will allow customers to use the Q button as a Fn button. This planned update also allows the user to disable the Q button and adds it as a choice in the Function (Fn) Settings enabling the option to assign it to a different Fn button.
Firmware Update Steps
Precaution
If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here*Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
Download
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that FUJIFILM Corporation. (“FUJI”) already distributed to you included with FUJI’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by FUJI, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
FUJI EXPRESSLY DISCLAIMS ANY WARRANTY FOR SOFTWARE. SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL FUJI BE LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES RESULTING FROM THE USE OF OR INABILITY TO USE SOFTWARE.
Article 3. Restrictions
You shall not, or shall not have any third party, reverse-engineer, decompile, or disassemble FIRMWARE.
Fujifilm X-T30, X-Pro3 и X100V получат обновления прошивки 17 февраля 2021
Сразу после анонса новых камер Fujifilm X-E4 и Fujifilm GFX 100S японский производитель фототехники — компания Fujifilm объявила о скором выходе обновлений прошивок для трех существующих моделей камер. Речь идет о следующих беззеркальных камерах (APS-C формат):
Обновление позволяет использовать камеры данных моделей в качестве подключаемых к компьютеру веб-камер. Они дадут значительный прирост по качеству картинки, которая, например, во время осуществления видеозвонков. Кроме того, также будет повышена и основная производительность этих фотокамер. Прошивка будет представлена в феврале месяце 2021 года.
Обновление прошивки Fujifilm X100V (2.00):
Это обновление прошивки добавляет ряд функций:
Обновление прошивки Fujifilm X-T30 (1.40):
Обновление прошивки Fujifilm X-Pro3 (1.20):
Также обратите внимание, что это будущее обновление, а не текущее. Эти обновления встроенного ПО будут доступны не раньше 17 февраля 2021 года. После этой даты вы сможете найти их на странице загрузок службы поддержки Fujifilm.
Также если вы пропустили, напомню, что несколько дней назад компания Fujifilm представила две новые фотокамеры: Fujifilm X-E4 и Fujifilm GFX100S, а также три новых объектива: Fujinon XF 27mm F/2.8 R WR, Fujinon GF 80mm F/1.7 R WR, Fujinon XF 70-300mm F/4-5.6 R LM OIS WR.
Следите за новостями в наших социальных сетях:
Вконтакте, Facebook, Instagram, Telegram и YouTube